“Ocean Avenger” Drill Line
Our new automated Drill Line, the Ocean Avenger by Peddinghaus, has the capability of boring uniform holes into section sizes ranging from 3” to 40”.
The holes can be ¼” to 1-1/2” in diameter and can reside in the web or the flanges of most structural sections. They can be placed at a tolerance of plus or minus 1/16.
All material must be precut to a single-pass length range of 1 to 40’. For longer lengths, please inquire.
Details by section size:
- Wide flange or S-beams; 3” through 40”
Hole placement: Web and flanges - Channels (all sections):
Hole placement: Web and legs - Angles; 3” through 8” (all thicknesses)
Hole placement: Both legs - Tubes; 3” and up (all thicknesses)
Hole placement: All sides - For flat bar and plate, please inquire.
Please visit www.oceanavenger.com if you would like to learn more about the Ocean Machinery Avenger.
